|
1. The surface must be clean and completely dry. ※ A drying time of 1~2 days is necessary after the cleaning of the area to be treated.
2. Apply the product evenly on the surface using a brush,
paint roller, mop, or a airless spray.
3. Allow 10~15 minutes after the application, and avoid contact
to the moisture and direct sunlight.
※ Do not allow to dry on the surface if not being absorbed
into the stone.
4. Remove the excess completely with a clean cloth.
5. For very absorbent surface, apply the product a few times more.
※ In case that Universal Tinting Paste (UTP) is used,
follow the direction for use provided by the UTP makers.
※ The best result will be achieved after 24 hours from
the treatment.
※ Before applying to the entire surface, test on a small area. | 
